CNC Haas Lathe Triple Tool Holder
Mounts in standard 1" square tool holder, speed up your run time and save on tool pockets! Holes are 3/4" diameter and spaced 1.2" apart for good amount of clearance on work piece and tooling. For reference the material in the video is 1 1/2" diameter and drilled and tapped with an "F" drill and 5/16-18 tap. BE SURE TO CHECK CLEARANCE ON TOOL CHANGES May need to adjust tool change position to clear machine when indexing. Orange coolant fittings brass plugs and set screws are all included. ER-16 holders, drills, and taps are NOT included
Mounts in standard 1" square tool holder, speed up your run time and save on tool pockets! Holes are 3/4" diameter and spaced 1.2" apart for good amount of clearance on work piece and tooling. For reference the material in the video is 1 1/2" diameter and drilled and tapped with an "F" drill and 5/16-18 tap. BE SURE TO CHECK CLEARANCE ON TOOL CHANGES May need to adjust tool change position to clear machine when indexing. Orange coolant fittings brass plugs and set screws are all included. ER-16 holders, drills, and taps are NOT included
Mounts in standard 1" square tool holder, speed up your run time and save on tool pockets! Holes are 3/4" diameter and spaced 1.2" apart for good amount of clearance on work piece and tooling. For reference the material in the video is 1 1/2" diameter and drilled and tapped with an "F" drill and 5/16-18 tap. BE SURE TO CHECK CLEARANCE ON TOOL CHANGES May need to adjust tool change position to clear machine when indexing. Orange coolant fittings brass plugs and set screws are all included. ER-16 holders, drills, and taps are NOT included